TDK MEMS-Mikrofone

Ergebnisse: 27
Auswählen Bild Teile-Nr. Herst. Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern. Menge RoHS ECAD Model Serie Empfindlichkeit Abweichungstoleranz Signal-Rausch-Verhältnis (SNR) Scheinwiderstand (Impedanz) Frequenzbereich Betriebsversorgungsstrom Betriebsversorgungsspannung Minimale Betriebstemperatur Maximale Betriebstemperatur Art der Ausgabe Port-Typ Länge Breite Tiefe Verpackung
TDK InvenSense MEMS-Mikrofone RF-Hardened, Low-Noise Microphone with Bottom Port and Analog Output 2 170Auf Lager
Min.: 1
Mult.: 1
Rolle: 1 000

- 38 dB 2 dB 65 dB 60 Hz to 20 kHz 210 uA 3.3 V - 40 C + 85 C Analog Bottom 3.35 mm 2.5 mm 0.98 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone Low-Noise Microphone with Bottom Port and Analog Output 3 077Auf Lager
Min.: 1
Mult.: 1
Rolle: 1 000

- 38 dB 65 dB 100 Hz to 16 kHz 200 uA - 40 C + 85 C Analog Bottom 3.35 mm 2.2 mm 0.88 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone Low-Noise Microphone with TDM Digital Output 3 295Auf Lager
Min.: 1
Mult.: 1
Rolle: 5 000

- 26 dB 1 dB 65 dB 50 Hz to 20 kHz 1.1 mA 3.3 V - 40 C + 85 C Digital Bottom 4 mm 3 mm 1 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone Dual Port Analog Microphone with Very High Dynamic Range 6 684Auf Lager
Min.: 1
Mult.: 1
Rolle: 5 000

ICS - 38 dBV 70 dBA 338 Ohms 80 Hz to 20 kHz 155 uA - 40 C + 85 C Analog 4 mm 3 mm 0.97 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone Analog Microphone 10 970Auf Lager
Min.: 1
Mult.: 1
Rolle: 9 000

- 38 dB 63 dB 250 Ohms 130 uA 1.8 V 0 C + 85 C Analog Bottom 2.75 mm 1.85 mm 0.9 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone Bottom Port PDM Digital Output Multi-Mode Microphone 39 344Auf Lager
Min.: 1
Mult.: 1
Rolle: 10 000

- 41 dB 68 dBA 27 Hz to 20 kHz 310 uA 1.8 V - 40 C + 85 C Digital Bottom 3.5 mm 2.65 mm 0.98 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone Bottom Port I2S Digital Output Multi-Mode Microphone 13 020Auf Lager
Min.: 1
Mult.: 1
Rolle: 10 000

T5848 - 36 dB 68 dBA 2 MHz to 3.7 MHz 310 uA 1.8 V - 40 C + 85 C Digital Bottom 3.5 mm 2.65 mm 0.98 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone Wide Dynamic Range Microphone with PDM Digital Output 34 696Auf Lager
Min.: 1
Mult.: 1
Rolle: 1 000

INMP621 - 46 dB 65 dB 45 Hz to 20 kHz 1.6 mA 1.3 V - 40 C + 85 C Digital Bottom 4 mm 3 mm 1 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone Bottom Port PDM Digital Output Multi-Mode Microphone 1 719Auf Lager
10 211Auf Bestellung
Min.: 1
Mult.: 1
Rolle: 10 000

- 37 dB 68 dBA 27 Hz to 20 kHz 310 uA 1.8 V - 40 C + 85 C Digital Bottom 3.5 mm 2.65 mm 0.98 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone Analog Microphone with Very High Dynamic Range 3 993Auf Lager
Min.: 1
Mult.: 1
Rolle: 10 000

ICS - 38 dBV 66 dBA 190 Ohms 35 Hz to 20 kHz 165 uA - 40 C + 85 C Analog 3.5 mm 2.65 mm 0.726 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone 63dBA 138SPL MEMS Mic Diff Ana Output 8 126Auf Lager
Min.: 1
Mult.: 1
Rolle: 10 000

- 43 dBV 63 dBA 355 Ohms 35 Hz to 20 kHz 1.17 mA 1.52 V to 3.63 V - 40 C + 105 C Analog 3.5 mm 2.65 mm 0.98 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone Low Noise Microphone with Differential Output 3 901Auf Lager
Min.: 1
Mult.: 1
Rolle: 5 000

- 32 dB 2 dB 70 dB 750 Ohms 75 Hz to 20 kHz 285 uA 1.8 V - 40 C + 85 C Analog Bottom 4 mm 3 mm 1.2 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone Ultra-Low Noise Microphone with Differential Output 12 418Auf Lager
Min.: 1
Mult.: 1
Rolle: 2 000

- 32 dB 2 dB 74 dB 25 Hz to 20 kHz Analog Bottom 4.72 mm 3.76 mm 3.5 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone Bottom Port PDM Low-Power Multi-Mode Microphone with High AOP Mode 10 852Auf Lager
Min.: 1
Mult.: 1
Rolle: 10 000

- 26 dB 1 dB 64 dB 50 Hz to 20 kHz 650 uA 1.8 V - 40 C + 85 C Digital Bottom 3.5 mm 2.65 mm 0.98 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone Analog Microphone with Very High Dynamic Range and a Low Power Mode 1 981Auf Lager
10 000erwartet ab 25.05.2026
Min.: 1
Mult.: 1
Rolle: 10 000

- 38 dB 1 dB 65 dB 50 Hz to 20 kHz 1.1 mA 3.3 V - 40 C + 85 C Analog Bottom 4 mm 3 mm 1 mm Reel, Cut Tape
TDK InvenSense MEMS-Mikrofone Top Port PDM Low-Power Multi-Mode Microphone with High AOP Mode 4 251Auf Lager
Min.: 1
Mult.: 1
Rolle: 10 000

ICS - 26 dB 65 dBA 1 MHz to 2.65 MHz 600 uA 1.65 V to 3.63 V - 40 C + 85 C Digital Top 3.5 mm 2.65 mm 0.98 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone Low-Noise Microphone with I S Digital Output 2 402Auf Lager
5 000erwartet ab 20.02.2026
Min.: 1
Mult.: 1
Rolle: 5 000

- 26 dB 1 dB 65 dB 50 Hz to 20 kHz 1 mA 3.3 V - 40 C + 85 C Digital Bottom 4 mm 3 mm 1 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone High SPL Analog Microphone with Extended Low Frequency Response 77Auf Lager
8 000erwartet ab 21.05.2026
Min.: 1
Mult.: 1
Rolle: 2 000

- 45 dB 2 dB 63 dB 200 Ohms 6 Hz to 20 kHz 210 uA 3.3 V - 40 C + 85 C Analog Bottom 4.72 mm 3.76 mm 3.5 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone Multi-Mode Microphone with I S Digital Output
19 916erwartet ab 21.04.2026
Min.: 1
Mult.: 1
Rolle: 10 000

- 26 dB 1 dB 64 dB 60 Hz to 20 kHz 490 uA 1.8 V - 40 C + 85 C Digital Bottom 3.5 mm 2.65 mm 0.98 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone Bottom Port PDM Low-Power Multi-Mode Microphone with High AOP Mode
39 825erwartet ab 24.02.2026
Min.: 1
Mult.: 1
Rolle: 10 000

- 32 dB 64 dBA 650 uA - 40 C + 85 C Digital Bottom 3.5 mm 2.65 mm 0.98 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone High Dynamic Range Microphone with Differential Output and Low Power
9 852erwartet ab 31.07.2026
Min.: 1
Mult.: 1
Rolle: 10 000

- 38 dB 1 dB 67 dB 5.5 kOhms 50 Hz to 20 kHz 165 uA 2.75 V - 40 C + 85 C Analog Bottom 3.5 mm 2.65 mm 0.98 mm Reel, Cut Tape, MouseReel
TDK InvenSense MEMS-Mikrofone Low-Noise Microphone with Bottom Port and Analog Output Nicht auf Lager
Min.: 10 000
Mult.: 10 000
Rolle: 10 000

- 38 dB 65 dB 100 Hz to 16 kHz 200 uA - 40 C + 85 C Analog Bottom 3.35 mm 2.2 mm 0.88 mm Reel
TDK InvenSense MEMS-Mikrofone Wide Dynamic Range Microphone with PDM Digital Output Nicht-auf-Lager-Vorlaufzeit 20 Wochen
Min.: 1
Mult.: 1
Rolle: 5 000

INMP621 - 46 dB 65 dB 45 Hz to 20 kHz 1.6 mA 1.3 V - 40 C + 85 C Digital Bottom 4 mm 3 mm 1 mm Reel, Cut Tape
TDK InvenSense EV_T5819-FX
TDK InvenSense MEMS-Mikrofone Nicht auf Lager
Min.: 1
Mult.: 1
TDK InvenSense EV_T5837-FX
TDK InvenSense MEMS-Mikrofone Nicht auf Lager
Min.: 1
Mult.: 1