Renesas Electronics YSDKS128E10 Development Kit

Das Renesas Synergy™ YSDKS128E10 Development Kit evaluiert die S128-MCU-Gruppe und ist in einem LQFP64-Gehäuse erhältlich. Dieses Development Kit ist in erster Linie für Software- und Hardwareentwickler zur Entwicklung von Firmware, zum Experimentieren und Evaluieren der umfangreichen Funktionen des S128 MCUs ausgelegt. Das YSDKS128E10 Development Kit zeichnet sich durch eine ARM v6-M-Architektur aus und bietet 256 KB Code-Flash-Speicher, 4 KB On-Chip-Flash-Speicher, 24 KB SRAM und ein USB 2.0 Full-Speed-Modul (USBFS).

The Renesas Electronics YSDKS128E10 Development Kit features a pre-installed Renesas Synergy S128 Microcontroller in an LQFP64 package.

Merkmale

Renesas Synergy S128 Microcontroller in an LQFP64 package
- Arm® Cortex®-M0+ Core
- Arm v6-M architecture
- Maximum operating frequency: 32 MHz
- Arm Memory Protection Unit (MPU) with 8 regions
- Debug and Trace: DWT, BPU, Core Sight™ MTB-M0+
- Core Sight™ Debug Port: SW-DP
Memory
- 256KB code flash memory
- 4KB on-chip data flash memory (up to 100,000 erase/write cycles)
- 24KB SRAM
Power
- Main power input of 5V to a barrel jack or USB Device input of 5V
- High-efficiency 5V to 3.3V system power DC-DC converter
- Low noise 5V to 3.3V power regulator for MCU analog functions
- Lithium coin cell holder for low-power operations testing
- Several jumper-configurable headers to allow selection of regulated or battery power source, and monitoring of currents and voltages
Connectivity
- USB 2.0 Full-Speed Module (USBFS)
- SPI and I²C interface, 8-pin header
- SEEED Grove I²C interface
CAN transceiver
- Configurable RS232/RS485 port on an industrial-style 3.5 mm screw terminal plug connector
- Digital Addressable Lighting Interface (DALI)
- PMOD 12-pin multi-type expanded interface (firmware configured)
Analog
- Stereo audio output with headphone jack, and single microphone input
- Operational Amplifier (OPAMP) x 4
- Ambient Light and Temperature sensor.
- User-adjustable manual thumb-wheel potentiometer
Human Machine Interface
- Two capacitive touch buttons and one capacitive touch-slider
- General Purpose I/O Ports
- Up to 53 input/output pins
User I/O
- Three user-configurable LEDs (red, yellow, and green)
- Two user-configurable push button switches