Texas Instruments WL18x7MOD Dual-Band-Combo 2x MIMO Wi-Fi-Module

Die WL18x7MOD Dualband, Combo 2x MIMO WiFi-Module von Texas Instruments bieten einen hohen Durchsatz und einen erweiterten Bereich sowie WiFi- und Bluetooth-Koexistenz (nur WL1837MOD) in einem leistungsoptimierten Design. Das WL18x7MOD ist eine WiFi-, 2,4 und 5GHz-Dualband-Modullösung mit zwei Antennen für den industriellen Temperaturbereich. Das Gerät ist gemäß FCC, IC, ETSI/CE, und TELEC zertifiziert für AP (mit DFS-Unterstützung) und Client. TI bietet Treiber für High-Level-Betriebssysteme wie Linux®, Android™, WinCE und RTOS.

Merkmale

General
- Integrates RF, Power Amplifiers (PAs), Clock, RF Switches, Filters, Passives, and Power Management
- Quick Hardware Design With TI Module Collateral and Reference Designs
- Operating Temperature: -40°C to 85°C Industrial Temperature Grade
- Small Form Factor: 13.3 × 13.4 × 2mm
- 100-Pin MOC Package
- FCC, IC, ETSI/CE, and TELEC Certified With Chip Antennas
Wi-Fi
- WLAN Baseband Processor and RF Transceiver Support of IEEE Std 802.11a, 802.11b, 802.11g, and 802.11n
- 20 and 40MHz SISO and 20MHz 2 x 2 MIMO at 2.4GHz for High Throughput: 80Mbps (TCP), 100Mbps (UDP)
- 2.4GHz MRC Support for Extended Range and 5-GHz Diversity Capable
- Fully Calibrated: Production Calibration Not Required
- 4-Bit SDIO Host Interface Support
- Wi-Fi Direct Concurrent Operation (Multichannel, Multirole)
Bluetooth and BLE (WL1837MOD Only)
- Bluetooth 4.1 and CSA2 Support
- Host Controller Interface (HCI) Transport for Bluetooth Over UART
- Dedicated Audio Processor Support of SBC Encoding + A2DP
- Dual-Mode Bluetooth and BLE
- Bluetopia + LE Certified Stack Provided by TI

Key Benefits
- Reduces Design Overhead
- Differentiated Use-Cases by Configuring WiLink 8 Simultaneously in Two Roles (STA and AP) to Connect Directly With Other Wi-Fi Devices on Different RF Channel (Wi-Fi Networks)
- Best-in-Class Wi-Fi With High-Performance Audio and Video Streaming Reference Applications With Up to 1.4X the Range Versus a Single Antenna
- Different Provisioning Methods for In-Home Devices Connectivity to Wi-Fi in One Step
- Lowest Wi-Fi Power Consumption in Connected Idle (< 800µA)
- Configurable Wake on WLAN Filters to Only Wake Up the System
- Wi-Fi-Bluetooth Single Antenna Coexistence