Zurück zu Monolithic Power Systems (MPS)

Monolithic Power Systems (MPS) MP2760 Evaluation Kit

Monolithic Power Systems (MPS) MP2760 Evaluation Kit is used to evaluate the MP2760 versatile buck-boost NVDC charger IC. The Monolithic Power Systems (MPS) MP2760 can handle batteries with 1 to 4 cells in series. The kit is a cutting-edge evaluation kit with many features to simplify testing and prototyping. With its wide input voltage range, USB PD compliance, and other advanced features, the EVKT-MP2760 is ideal for developing advanced battery charging solutions.

Features

  • Fully integrated buck-boost charger with low on-resistance (RDS(ON)) power MOSFETs for 1 to 4 cells in series battery pack
  • Integrated N-Channel MOSFET driver for narrow-voltage DC (NVDC) power path control
  • Integrated N-Channel MOSFET driver for input power pass-through
  • Wide operating range
    • 4V to 22V operating input voltage (VIN)
    • 3V to 21V reverse output voltage (VOUT) with 20mV/step
    • Up to 6A input current (IIN) limit with 50mA/step
    • Up to 6A charge current with 50mA/step
    • Up to 6A output current (IOUT) with 50mA/step
    • 3.4V/cell to 4.67V/cell battery-full voltage with 0.5% accuracy
    • 4V to 20.4V minimum VIN limit with 80mV/step
    • 500kHz to 1.2MHz switching frequency (fSW)
  • I2C or SMBus host control interface to support flexible parameter setting and status reporting
  • Integrated 10-bit analog-to-digital converter (ADC) for voltage, current, and temperature monitoring
  • Analog output pin to monitor charge current
  • Built-in robust protections
    • Input Over-Voltage Protection (OVP)
    • Battery OVP
    • Output Short-Circuit Protection (SCP) in source mode
    • Battery missing detection
    • NTC pin floating detection
    • Configurable JEITA for battery temperature protection
    • Thermal regulation and thermal shutdown
    • Safety charge timer
  • Available in a TQFN-30 (4mm x 5mm) package

Block Diagram

Block Diagram - Monolithic Power Systems (MPS) MP2760 Evaluation Kit

Related Products

Monolithic Power Systems (MPS) MP2760 Battery Management Buck/Boost Charger ICs

Designed for battery packs with 1 to 4 cells in series and accepts a 4V to 22V input voltage range.

Learn Moreüber Monolithic Power Systems (MPS) MP2760 Battery Management Buck/Boost Charger ICs View Productsverwandt mit Monolithic Power Systems (MPS) MP2760 Battery Management Buck/Boost Charger ICs
Veröffentlichungsdatum: 2023-04-24 | Aktualisiert: 2023-05-05