Alle Ergebnisse (1 209)

Auswählen Bild Teile-Nr. Herst. Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern. Menge RoHS
Marki Microwave Signalaufbereitung This equalizer provides 2.6 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 4 dB and a 50-ohm match maintained over the entire operating range. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm. 2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 9 GHz bandwidth. 107Auf Lager
Min.: 1
Mult.: 1

Marki Microwave EVB-MM1A-0626S
Marki Microwave RF-Entwicklungstools This is the evaluation board for the MM1A-0626SPSM integrated drive GaAs MMIC mixer. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave EVB-MEQ3-20
Marki Microwave RF-Entwicklungstools The EVB-MEQ3-20 is a connectorized evaluation board for the MEQ3-20CSP1 passive MMIC surface mount 20 GHz equalizer. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave EVB-MEQ6-20
Marki Microwave RF-Entwicklungstools The EVB-MEQ6-20 is a connectorized evaluation board for the MEQ6-20CSP1 passive MMIC surface mount 20 GHz equalizer. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave EVB-MFLP-00011P
Marki Microwave RF-Entwicklungstools The EVB-MFLP-00011P is a connectorized evaluation board for the MFLP-00011PSM passive MMIC surface mount 7.1GHz lowpass filter. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave EVB-MPD-0422F
Marki Microwave RF-Entwicklungstools The EVB-MPD-0422F is a connectorized evaluation board for the MPD-0422FCSP2 MMIC 4-22GHz 2-Way power divider/power splitter. 2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave EVB-MFBP-00152
Marki Microwave Marki Microwave MMIC, 12-16 GHz Bandpass Filter, CSP3, QFN mounted into evaluation board (2.92mm-F) 2Auf Lager
Min.: 1
Mult.: 1
Marki Microwave RF-Entwicklungstools The EVB-MM1A-1855HP is a connectorized evaluation board for the MM1A-1855HPSM is a versatile, robust, and broadband double balanced mixer with an integrated broadband LO driver amplifier. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Dämpfer The ATN01-0040PSM is a surface mount GaAs MMIC 1dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. 39Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker The ADM-8350PSM is a high-linearity, low noise amplifier capable of providing +22 dBm output power up to 6 GHz. The ADM-8350PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1

Marki Microwave RF-Entwicklungstools The EVB-MFLP-00002P is a connectorized evaluation board for the MFLP-00002PSM passive MMIC surface mount 9.40GHz lowpass filter. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Dämpfer The ATN02-0040PSM is a surface mount GaAs MMIC 2dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications. Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BTM-0026PSM-2 is a packaged miniature bias tee featuring excellent 0.4 dB insertion loss and superior 25 dB isolations over a broad 10 MHz to 26 GHz bandwidth. The BTM-0026PSM-2 works well for K-Band applications. 21Auf Lager
Min.: 1
Mult.: 1

Marki Microwave RF-Entwicklungstools The EVB-MMPX-00001P is a connectorized evaluation board for the MMPX-00001PSM is a MMIC surface mount quadplexer capable of multiplexing 2-4 GHz / 6-8 GHz / 10-12 GHz / 14-16 GHz signals. 1Auf Lager
Min.: 1
Mult.: 1
Marki Microwave HF-Mixer The MMIQ-0416LSM is a low LO drive, passive GaAs MMIC IQ. This is an ultra-broadband mixer spanning 4 to 16GHz on the RF and LO ports with an IF from DC to 6 GHz. 14Auf Lager
75Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN package. 51Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Mixer The MM2-0530HSM is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530HSM is 4x4 mm QFN packaged. 29Auf Lager
50erwartet ab 08.10.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MQS-0218SM is a MMIC 2GHz - 18GHz 90 splitter/combiner. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MQS-0218SM is available as a 4 x 4 mm QFN package. 13Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Mixer The MM1-1453HSM is a high frequency GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performances across a broad bandwidth. 31Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Mixer The MM1-1453LSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth.The MM1-1453LSM is available in a 4x4 mm QFN package. 23Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Mixer A broadband passive GaAs MMIC IQ mixer that operates across an unrivaled 2-18 GHz RF/LO band with an IF from DC to 3 GHz. Excellent phase and amplitude balance of the on-chip LO quadrature hybrid leads to typical image rejection of 35 dB. 8Auf Lager
Min.: 1
Mult.: 1

Marki Microwave RF-Entwicklungstools The MFBC-00001P is a connectorized evaluation board for the MFBC-00001PSM passive MMIC surface mount 7.40 9.90 GHz bandpass filters. 1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of 14 dBm. 22Auf Lager
50erwartet ab 09.09.2026
Min.: 1
Mult.: 1