Alle Ergebnisse (1 207)

Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
Marki Microwave EVB-MFLP-00028
Marki Microwave RF-Entwicklungstools The EVB-MFLP-00028 is a connectorized evaluation board for the MFLP-00028CSP1 passive MMIC surface mount 10.7 GHz lowpass filter.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD-0422FCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 0.7 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
64Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD-0422SCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
159Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD4-0422CSP2 is a small footprint MMIC 4-22 GHz 4-Way power divider/power splitter featuring high 30 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
141Auf Lager
50erwartet ab 26.08.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MFBP-00099PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00099PSM features a 9.0-10.4GHz 1dBc passband and 2.8dB center frequency insertion loss.
Datenblatt
25Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD-1260SCSP2 is a small footprint MMIC 12-60 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 0.6 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
29Auf Lager
25erwartet ab 06.10.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD-1260FCSP2 is a small footprint MMIC 12-60 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.3 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
28Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
Datenblatt
25Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD-0222FCSP2 is a small footprint MMIC 2-22 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 0.6 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
86Auf Lager
75erwartet ab 14.08.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD-0108FCSP2 is a small footprint MMIC 1-8 GHz 2-Way power divider/power splitter featuring high 23 dB isolation and low 0.8 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
21Auf Lager
50erwartet ab 13.08.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD-0108SCSP2 is a small footprint MMIC 1-8 GHz 2-Way power divider/power splitter featuring high 23 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
13Auf Lager
Min.: 1
Mult.: 1


Marki Microwave RF-Entwicklungstools The EVB-MDPX-00004P is a connectorized evaluation board for the MDPX-00004PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 6 GHz and high frequency 8 to 28 GHz signals.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung This equalizer provides 2.6 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 4 dB and a 50-ohm match maintained over the entire operating range.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave EVB-MFBP-00138P
Marki Microwave RF-Entwicklungstools The EVB-MFBP-00138P is a connectorized evaluation board for the MFBP-00138PSM passive MMIC surface mount 11.0-17.5GHz bandpass filter.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD4-0108CSP2 is a small footprint MMIC 1-8 GHz 4-Way power divider/power splitter featuring high 30 dB isolation and low 2.6 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
22Auf Lager
50Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD-0R402SCSP2 is a small footprint MMIC 0.4-2.5 GHz 2-Way power divider/power splitter featuring high 20 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
12Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip scale package.
Datenblatt
11Auf Lager
50Auf Bestellung
Min.: 1
Mult.: 1


Marki Microwave RF-Entwicklungstools The EVB-MDPX-00007P is a connectorized evaluation board for the MDPX-00007PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 12 GHz and high frequency 14 to 28 GHz signals.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPD4-0R404CSP2 is a small footprint MMIC 0.4-4 GHz 4-Way power divider/power splitter featuring high 20 dB isolation and 3.4 dB insertion loss in our compact CSP2 chip scale package.
Datenblatt
23Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system design.
Datenblatt
1Auf Lager
50erwartet ab 11.12.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system design.
Datenblatt
8Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.
Datenblatt
21Auf Lager
4erwartet ab 07.08.2026
Min.: 1
Mult.: 1