Alle Ergebnisse (1 667)

SparkFun Zubehör This is a stainless steel Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals connecting them at the two ends and making a temperature gradient between one end and the other (a 'hot' end and a 'cold' one).

SparkFun Zubehör PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.

SparkFun Zubehör USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi

SparkFun Zubehör This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. This is not a true piezoelectric speaker but behaves similarly. Instead of a piezoelectric crystal t

SparkFun Zubehör LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

SparkFun Zubehör PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e

SparkFun Zubehör For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding

SparkFun Zubehör DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet

SparkFun Zubehör Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con

SparkFun Zubehör This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of

SparkFun Zubehör A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safety features. This

SparkFun Zubehör We don't say this lightly: this might be the best solder on the market! There we said it. This "Special Blend" wasn't just picked from a catalog; it is the result of a quest to find the perfect alloy for our own production lines here at SparkFun. Af