Ergebnisse: 315
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS ECAD Model Produkt-Typ
Produkt
Frequenz
Frequenzbereich
Nennspannung
Scheinwiderstand (Impedanz)
Montage
Verpackung/Gehäuse
Minimale Betriebstemperatur
Maximale Betriebstemperatur
Marki Microwave Signalaufbereitung The MMIQ-1865S is a high linearity, passive MMIC IQ mixer. This is an ultra-broadband mixer spanning 18 to 65 GHz on the RF and LO ports with an IF from DC to 23 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MMIQ-30120H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 30 to 120 GHz on the RF and LO ports with an IF from DC to 30 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MMIQ-40100H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 40 to 100 GHz on the RF and LO ports with an IF from DC to 20 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Signalaufbereitung The MMIQ-40100L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 40 to 100 GHz on the RF and LO ports with an IF from DC to 20 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1
Signal Conditioning
Marki Microwave Signalaufbereitung This is an ultra-broadband mixer spanning 40 to 67 GHz on the RF and LO ports with an IF from DC to 20 GHz. Up to 25 dB of image rejection is available due to the excellent phase and amplitude balance of its on-chip LO quadrature hybrid.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung Q-40125H is a MMIC millimeter wave 4x multiplier fabricated with GaAs Schottky diodes. MMQ-40125H operates over a 10 to 31.25 GHz input frequency range or a quadrupled output frequency range of 40 to 125 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MPDR-00110M2 is a mmWave 2-way resistive power divider in our connectorized miniature M2-package enabling operation from DC to 110 GHz. The MPDR-00110M2 is available as a 1.0mm connectorized module.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MPDW-10110M2 is a mmWave 2-way Wilkinson power divider featuring high isolation in our connectorized miniature M2-package enabling operation up to 110 GHz. The MPDW-10110M2 is available as a 1.0mm connectorized module.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MQS-0209 is a MMIC 2GHz - 9GHz 90 splitter/combiner. Wire bondable 50 ohm terminations are available on-chip. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MQS-0218 is a MMIC 2GHz - 18GHz 90 splitter/combiner. Wire bondable 50 ohm terminations are available on-chip. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung MQS-0418 is a MMIC 4GHz - 18GHz 90 splitter/combiner. Wire bondable 50 ohm terminations are available on-chip. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MT3A-0113H is a versatile, robust, and broadband Two-Tone-Terminator mixer integrated with a low phase noise LO driver amplifier.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MT3H-0113H is a triple balanced passive diode mixer offering high dynamic range, low conversion loss, and excellent repeatability.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The MT3H-0113L is a triple balanced passive diode mixer offering high dynamic range, low conversion loss, and excellent repeatability.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung MT3L-0113H is a GaAs MMIC triple balanced mixer with high dynamic range and low conversion loss. This mixer belongs to the T3 family which offers high IP3, P1dB, and broad operating bandwidths for applications in the S, C and X bands.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung NLTL-6273 is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent phase noise performance over a low 0.7 to 5 GHz input frequency range with output tones beyond 40 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung NLTL-6275 is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent phase noise performance over a 3 to 15 GHz input frequency range with output tones beyond 85 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung NLTL-6275 is a MMIC non-linear transmission line (NLTL) based comb generator. This NLTL offers excellent phase noise performance over a 3 to 15 GHz input frequency range with output tones beyond 85 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung The PBR-0012 is a 300 kHz to 12 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 35 dB typical isolation across the operational bandwidth.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung A resistive 2-way power divider that features broadband operation from DC to 10 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1
Signal Conditioning Power Divider 0 Hz to 20 GHz Connector 20.32 mm x 6.06 mm - 55 C + 100 C
Marki Microwave Signalaufbereitung
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 5
Mult.: 5
Signal Conditioning Power Divider 0 Hz to 20 GHz Connector 20.32 mm x 6.06 mm - 55 C + 100 C
Marki Microwave Signalaufbereitung A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Signalaufbereitung
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 5
Mult.: 5
Signal Conditioning Power Divider 0 Hz to 30 GHz Connector 20.32 mm x 6.06 mm - 55 C + 100 C
Marki Microwave Signalaufbereitung 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Signal Conditioning