|
|
Sensor-Kleinteile u. Zubehör Bracket: Heavy-duty die-cast bracket M18 vertical mount option; +/- 8 deg tilt adjustment with cabled units; Includes nuts and lock washerr; Used with QS30 (DC only)
- SMBQS30Y
- Banner Engineering
-
1:
€ 16,34
-
1Auf Lager
|
Mouser-Teilenr.
778-SMBQS30Y
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: Heavy-duty die-cast bracket M18 vertical mount option; +/- 8 deg tilt adjustment with cabled units; Includes nuts and lock washerr; Used with QS30 (DC only)
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Sensor Mounting Bracket; R90 Stacking; M4 X 0.7 mm; Stainless Steel
- SMBR90S
- Banner Engineering
-
1:
€ 15,48
-
5Auf Lager
|
Mouser-Teilenr.
778-SMBR90S
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Sensor Mounting Bracket; R90 Stacking; M4 X 0.7 mm; Stainless Steel
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Montagekleinteile Bracket for Mounting R95; R95 Right-Angle; M4 x 0.7 mm; Stainless Steel
- SMBR95RA
- Banner Engineering
-
1:
€ 21,50
-
2Auf Lager
|
Mouser-Teilenr.
778-SMBR95RA
|
Banner Engineering
|
Montagekleinteile Bracket for Mounting R95; R95 Right-Angle; M4 x 0.7 mm; Stainless Steel
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Magnet Mount Kit; For Use With WLA Series Lights; 2.3 in Diameter; Up To 35 LB Pull
- SMBWLAMAG
- Banner Engineering
-
1:
€ 26,66
-
1Auf Lager
|
Mouser-Teilenr.
778-SMBWLAMAG
|
Banner Engineering
|
LED-Montage-Zubehör Magnet Mount Kit; For Use With WLA Series Lights; 2.3 in Diameter; Up To 35 LB Pull
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: Right Hand Mounting (Set of Two) hardware included; Used with WLS28 models
- SMBWLS28RA
- Banner Engineering
-
1:
€ 10,32
-
44Auf Lager
|
Mouser-Teilenr.
778-SMBWLS28RA
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: Right Hand Mounting (Set of Two) hardware included; Used with WLS28 models
|
|
44Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: Right-Angle for Surface Mounting (Set of Two) hardware included; Used with WLS28 models
- SMBWLS28SM
- Banner Engineering
-
1:
€ 22,36
-
4Auf Lager
|
Mouser-Teilenr.
778-SMBWLS28SM
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: Right-Angle for Surface Mounting (Set of Two) hardware included; Used with WLS28 models
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: For use with WLS28; Set of two snap brackets; 300 Series Stainless Steel
- SMBWLS28SP
- Banner Engineering
-
1:
€ 12,04
-
51Auf Lager
|
Mouser-Teilenr.
778-SMBWLS28SP
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: For use with WLS28; Set of two snap brackets; 300 Series Stainless Steel
|
|
51Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Accessory: Magnet Mount Kit; Set of 2; For Use With WLS28 Series Lights; 2.3 in Diameter; Up to 35 lb Pull
- SMBWLSMAG
- Banner Engineering
-
1:
€ 15,48
-
17Auf Lager
|
Mouser-Teilenr.
778-SMBWLSMAG
|
Banner Engineering
|
LED-Montage-Zubehör Accessory: Magnet Mount Kit; Set of 2; For Use With WLS28 Series Lights; 2.3 in Diameter; Up to 35 lb Pull
|
|
17Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör 3DTOF Series Mounting Plate; 11-gauge Stainless Steel; M4 x 0.7 Mounting Hardware Included
- SMBZMXMP
- Banner Engineering
-
1:
€ 40,42
-
3Auf Lager
|
Mouser-Teilenr.
778-SMBZMXMP
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör 3DTOF Series Mounting Plate; 11-gauge Stainless Steel; M4 x 0.7 Mounting Hardware Included
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Accessory: TL50 foldable Mounting Bracket; Mounting Base 90 mm diameter- 4 Mounting Holes; Material: Black Polycarbonate; Mounting Hardware Included
- SOKTL150R4
- Banner Engineering
-
1:
€ 26,66
-
9Auf Lager
|
Mouser-Teilenr.
778-SOKTL150R4
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Accessory: TL50 foldable Mounting Bracket; Mounting Base 90 mm diameter- 4 Mounting Holes; Material: Black Polycarbonate; Mounting Hardware Included
|
|
9Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör SOP-E12-1500 A,1500 mm (60 in) Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
- SOP-E12-1500A
- Banner Engineering
-
1:
€ 93,74
-
1Auf Lager
|
Mouser-Teilenr.
778-SOP-E12-1500A
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör SOP-E12-1500 A,1500 mm (60 in) Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Accessory: 150 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Stainless steel; 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
- SOP-E12-150SS
- Banner Engineering
-
1:
€ 24,94
-
7Auf Lager
|
Mouser-Teilenr.
778-SOP-E12-150SS
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Accessory: 150 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Stainless steel; 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
|
|
7Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Accessory: 300 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Stainless steel; 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
- SOP-E12-300SS
- Banner Engineering
-
1:
€ 36,12
-
6Auf Lager
|
Mouser-Teilenr.
778-SOP-E12-300SS
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Accessory: 300 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Stainless steel; 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
|
|
6Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Accessory: 900 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
- SOP-E12-900A
- Banner Engineering
-
1:
€ 41,28
-
9Auf Lager
-
26erwartet ab 24.02.2026
|
Mouser-Teilenr.
778-SOP-E12-900A
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Accessory: 900 mm Elevated-Use Stand-Off Pipe (1/2 in NPSM/DN15); Material: Anodized Aluminum (BLACK); 1/2 NPT Thread At Both Ends; Compatible With Most Industrial Environments
|
|
9Auf Lager
26erwartet ab 24.02.2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schalterkleinteile Washdown Cover; FDA Grade Silicone; Fits SSA-XXXX E-STOP; IP67 & IP69K Rated
- SSA-EB1P-ECWC
- Banner Engineering
-
1:
€ 42,14
-
8Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SSA-EB1P-ECWC
|
Banner Engineering
|
Schalterkleinteile Washdown Cover; FDA Grade Silicone; Fits SSA-XXXX E-STOP; IP67 & IP69K Rated
|
|
8Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schalterkleinteile ISD Connect; Input Type 2NC Safe; Input Connector 5-pin M12 A; Pin1:Ch1a,Pin2:Ch1b,Pin3:N/C,Pin4:Ch2a,Pin5:Ch2b
- SSA-ISD-TCA
- Banner Engineering
-
1:
€ 130,72
-
4Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SSA-ISD-TCA
|
Banner Engineering
|
Schalterkleinteile ISD Connect; Input Type 2NC Safe; Input Connector 5-pin M12 A; Pin1:Ch1a,Pin2:Ch1b,Pin3:N/C,Pin4:Ch2a,Pin5:Ch2b
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schalterkleinteile Bracket: E-STOP Mounting Hub Bracket; Right-Angle; One 30 mm hole; 316 Stainless Steel
- SSA-MBK-EEC1-SS
- Banner Engineering
-
1:
€ 49,02
-
5Auf Lager
|
Mouser-Teilenr.
778-SSA-MBK-EEC1-SS
|
Banner Engineering
|
Schalterkleinteile Bracket: E-STOP Mounting Hub Bracket; Right-Angle; One 30 mm hole; 316 Stainless Steel
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MINI-BEAM: Replacement Lens Assemblies; Replaces LVAG; Changes LV to LVAG
- UC-300AG
- Banner Engineering
-
1:
€ 25,80
-
3Auf Lager
|
Mouser-Teilenr.
778-UC-300AG
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MINI-BEAM: Replacement Lens Assemblies; Replaces LVAG; Changes LV to LVAG
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MINI-BEAM: Replacement Lens Assemblies; Replaces F & FV; Changes D to F and DBZ to F
- UC-300F
- Banner Engineering
-
1:
€ 19,78
-
1Auf Lager
|
Mouser-Teilenr.
778-UC-300F
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MINI-BEAM: Replacement Lens Assemblies; Replaces F & FV; Changes D to F and DBZ to F
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MINI-BEAM: Replacement Lens Assemblies; Replaces LV & D; Changes F to D LVAG to LV and DBZ to D
- UC-300L
- Banner Engineering
-
1:
€ 25,80
-
6Auf Lager
|
Mouser-Teilenr.
778-UC-300L
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MINI-BEAM: Replacement Lens Assemblies; Replaces LV & D; Changes F to D LVAG to LV and DBZ to D
|
|
6Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Circular - diameter 24 mm; Reflectivity Factor: 1.0; Max. Temp.= 65 degrees C; Plastic - no mounting included
- BRT-1
- Banner Engineering
-
1:
€ 9,46
-
22Auf Lager
|
Mouser-Teilenr.
778-BRT-1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Circular - diameter 24 mm; Reflectivity Factor: 1.0; Max. Temp.= 65 degrees C; Plastic - no mounting included
|
|
22Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Circular - diameter 40 mm; Reflectivity Factor: 1.0; Max. Temp.= 65 degrees C; Plastic - no mounting included
- BRT-1.5
- Banner Engineering
-
1:
€ 11,18
-
24Auf Lager
|
Mouser-Teilenr.
778-BRT-1.5
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Circular - diameter 40 mm; Reflectivity Factor: 1.0; Max. Temp.= 65 degrees C; Plastic - no mounting included
|
|
24Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Rectangular 100 x 18 mm; Reflectivity Factor: 1.4; Max. Temp.= 50 degrees C; Plastic - two screw holes for mounting
- BRT-100X18A
- Banner Engineering
-
1:
€ 12,04
-
23Auf Lager
|
Mouser-Teilenr.
778-BRT-100X18A
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Rectangular 100 x 18 mm; Reflectivity Factor: 1.4; Max. Temp.= 50 degrees C; Plastic - two screw holes for mounting
|
|
23Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Rectangular 100 x 50 mm; Reflectivity Factor: 1.5; Max. Temp.= 50 degrees C; Plastic - adhesive back for mounting
- BRT-100X50
- Banner Engineering
-
1:
€ 15,48
-
6Auf Lager
|
Mouser-Teilenr.
778-BRT-100X50
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Rectangular 100 x 50 mm; Reflectivity Factor: 1.5; Max. Temp.= 50 degrees C; Plastic - adhesive back for mounting
|
|
6Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Rectangular 100 x 55 mm; Reflectivity Factor: 1.5; Max. Temp.= 50 degrees C; Plastic - two holes and adhesive back for mounting
- BRT-100X55A
- Banner Engineering
-
1:
€ 16,34
-
27Auf Lager
|
Mouser-Teilenr.
778-BRT-100X55A
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Retroreflective Target: Rectangular 100 x 55 mm; Reflectivity Factor: 1.5; Max. Temp.= 50 degrees C; Plastic - two holes and adhesive back for mounting
|
|
27Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Österreich
