Alle Ergebnisse (377)

Wählen Sie eine Kategorie unten, um die Filteroptionen zu sehen und Ihre Suche einzugrenzen.
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
Marki Microwave Signalaufbereitung The CBR17-0026 offers the broadest bandwidth of any standalone bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-0222L is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across a broad bandwidth. The MM1 0222L works well as both an up and down converter through the Ku band and beyond.
Datenblatt
10Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM1-0312H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM1-0832L is a GaAs MMIC double balanced mixer that is designed for and operates at X through K bands. MM1-0832L is a low power K band mixer that works well as both an up and down converter.
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MMIQ-0416L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
Datenblatt
4Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Datenblatt
10Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Datenblatt
6erwartet ab 31.07.2026
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BT2-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Datenblatt
2erwartet ab 26.06.2026
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BTN2-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Datenblatt
1erwartet ab 07.08.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Datenblatt
3Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.
Datenblatt
3erwartet ab 29.05.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM1-0626H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Datenblatt
10erwartet ab 29.05.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
Datenblatt
1erwartet ab 21.08.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
Datenblatt
3erwartet ab 05.06.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
Datenblatt
1erwartet ab 23.10.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Datenblatt
1erwartet ab 28.05.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
Datenblatt
1erwartet ab 05.06.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-1467H is a GaAs MMIC double balanced mixer with a broad IF bandwidth and low conversion loss. This mixer is ideal for applications which require broad IF bandwidths with operation at mmWave frequencies.
Datenblatt
1erwartet ab 20.07.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Datenblatt
1erwartet ab 02.10.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1