Alle Ergebnisse (1 203)

Wählen Sie eine Kategorie unten, um die Filteroptionen zu sehen und Ihre Suche einzugrenzen.
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
Marki Microwave HF-Verstärker A wideband low noise amplifier capable of providing 17 dB gain and +30 dBm OIP3 with a low 1.9 dB typical noise figure. The AMM-9858PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Marki Microwave HF-Verstärker A wideband low noise amplifier capable of providing 15 dB gain and +28 dBm OIP3 with a low 1.9 dB typical noise figure. The AMM-9859PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Marki Microwave HF-Verstärker A wideband low noise amplifier capable of providing 13.5 dB gain and +28 dBm OIP3 with a low 2.7 dB typical noise figure. The AMM-9860PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Marki Microwave HF-Verstärker A wideband low noise amplifier capable of providing 11.7 dB gain and +24 dBm OIP3 with a low 2.5 dB typical noise figure. The AMM-9861PSM is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Marki Microwave HF-Verstärker A wideband gain block capable of providing 10 dB gain and +23 dBm OIP3 with a low 3.4 dB typical noise figure. The AMM-9862PSM is an ideal linear signal amplifier for applications requiring low gain, low power consumption and small form-factors.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Marki Microwave Signalaufbereitung A wideband mmWave amplifier in our M-package enabling operation up to 95 GHz in a connectorized form. This amplifier provides typical +18 dBm output power, 20 dB gain making it suitable for driving mmWave mixers.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The AMM2-0020UH is a broadband amplifier enabling operation over a 10 MHz to 20 GHz frequency range. The amplifier features a 29 dB flat gain response, +23 dBm saturated output power, excellent return losses, and a low 2.5 dB noise figure.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The AMM2-0070UH is a ultra-broadband high gain amplifier capable of delivering high 18 dB gain over a 10 MHz to 70 GHz frequency range. The AMM2-0070UH features excellent 20 dB return losses, a positive gain slope response and 4.5 dB noise figure.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A single stage broadband, low phase noise LO driver amplifier designed to provide saturated +21 dBm output power. It uses GaAs HBT technology for low phase noise, and provides industry leading -170 dBc/Hz at 10 kHz offset from carrier frequency.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The APM-7098 is a broadband distributed, low phase noise LO driver amplifier designed to provide a saturated +23 dBm output power with low DC power consumption.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker The APM-7098SM is a broadband low phase noise LO driver amplifier designed to provide a saturated +23 dBm output power with low DC power consumption.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The APM-7099 is a broadband distributed, low phase noise driver amplifier designed to provide a saturated +25 dBm output power with low DC power consumption.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker The APM-7099SM is a broadband low phase noise driver amplifier designed to provide a saturated +25 dBm output power with low DC power consumption.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Marki Microwave Signalaufbereitung The APM-7516 is a robust broadband distributed, low phase noise LO driver amplifier designed to provide greater than +20 dBm output power with excellent return losses and high input power handling.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker The APM-7516PSM is a broadband low phase noise driver amplifier designed to provide enough power to drive the LO port of an H or L-diode mixer with a range of input powers.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 25
Mult.: 25

Marki Microwave Dämpfer The ATN00-0040PSM is a surface mount GaAs MMIC 0dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1

Marki Microwave Dämpfer The ATN00-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN00-0070CSP1 features a typical 0.3 dB attenuation with 0.1 dB attenuation flatness and 20 dB return loss across the DC-70 GHz bandwidth.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1
Marki Microwave Dämpfer The ATN01-0040PSM is a surface mount GaAs MMIC 1dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1

Marki Microwave Dämpfer The ATN01-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN01-0070CSP1 features a typical 1.3 dB attenuation with 0.2 dB attenuation flatness and 23 dB return loss across the DC-70 GHz bandwidth.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1
Marki Microwave Dämpfer The ATN02-0040PSM is a surface mount GaAs MMIC 2dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1

Marki Microwave Dämpfer The ATN02-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN02-0070CSP1 features a typical 2.1 dB attenuation with 0.1 dB attenuation flatness and 25 dB return loss across the DC-70 GHz bandwidth.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1
Marki Microwave Dämpfer - Interconnects The ATN03-0040BH is a GaAs MMIC attenuator in an inline connectorized bullet housing package. The ATN03-0040BH provides a nominal 3.5 dB attenuation over a DC to 40 GHz operating range.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 12 Wochen
Min.: 1
Mult.: 1

Marki Microwave Dämpfer The ATN03-0040PSM is a surface mount GaAs MMIC 3dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1

Marki Microwave Dämpfer The ATN03-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN03-0070CSP1 features a typical 3.2 dB attenuation with 0.1 dB attenuation flatness and 22 dB return loss across the DC-70 GHz bandwidth.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1
Marki Microwave Dämpfer The ATN04-0040PSM is a surface mount GaAs MMIC 4dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 10 Wochen
Min.: 1
Mult.: 1