Microchip Technology ATtiny102/104 AVR 8-Bit Mikrocontroller

Die 8-Bit AVR-Mikrocontroller ATtiny102/104 von Microchip basieren auf der AVR®-verbesserten RISC-Architektur. Durchläufe von fast 1 MIPS pro MHz werden durch das Ausführen leistungsfähiger Befehle in einem einzigen Taktzyklus erreicht. Dies ermöglicht eine Geräteoptimierung für den Stromverbrauch im Vergleich zur Verarbeitungsgeschwindigkeit. Die Hochleistungs-Mikrocontroller ATtiny 102 und ATtiny104 mit niedrigem Stromverbrauch verfügen über 1024 Bytes In-System-programmierbarem Flash-Speicher mit 32 Bytes internem SRAM.

Merkmale

High-performance and low power Microchip^® AVR^® 8-Bit microcontroller family
- Advanced RISC architecture
  - 54 Powerful instructions
  - Mostly single clock cycle execution
  - 16x8 general purpose working registers
  - Fully static operation
  - Up to 12MIPS throughput at 12MHz
Non-volatile program and data memories
- 1024Bytes of In-system programmable flash program memory
- 32Bytes internal SRAM
- Flash Write/Erase cycles 10,000
- Data retention 20 years at 85°C / 100 years at 25°C
- Self-programming flash on full operating voltage range (1.8V to 5.5V)
Peripheral features
- One 16-bit Timer/Counter (TC) with prescaler, input capture, two output capture, and two PWM channels
- Programmable Watchdog Timer (WDT) with separate on-chip oscillator
- Selectable internal voltage references 1.1V, 2.2V and 4.3V
- 10-bit ADC with 8-Channels/14-pin and 5-Channel/8-pin package options
- On-chip Analog Comparator (AC)
- Serial communication module: Single USART

Special microcontroller features
- In-System programmable
  - External programming (2.7 to 5.5V)
  - Self-programming (1.8 to 5.5V)
External and internal interrupt sources
Low power Idle, ADC noise reduction, and power-down modes
Enhanced power-on reset circuit
Programmable supply voltage level monitor with interrupt and reset
Accurate internal calibrated oscillator
Fast and normal start-up time options are available
I/O and packages
- 12 programmable I/O lines for ATtiny104 and 6 programmable I/O lines for ATtiny102
- 8-pin UDFN (ATtiny102)
- 8-pin SOIC150 (ATtiny102)
- 14-pin SOIC150 (ATtiny104)
1.8V to 5.5V operating voltage range
Up to -40°C to 125°C temperature range
Speed grades
- 0 to 4MHz at 1.8V to 5.5V
- 0 to 8MHz at 2.7V to 5.5V
- 0 to 12MHz at 4.5V to 5.5V